FHIR Implementation Guide for ABDM
6.5.0 - active India flag

Banner

This page is part of the FHIR Implementation Guide for ABDM (v6.5.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: CoverageEligibilityRequest - Detailed Descriptions

Draft as of 2025-03-18

Definitions for the CoverageEligibilityRequest resource profile.

Guidance on how to interpret the contents of this table can be found here

0. CoverageEligibilityRequest
Definition

The CoverageEligibilityRequest provides patient and insurance coverage information to an insurer for them to respond, in the form of an CoverageEligibilityResponse, with information regarding whether the stated coverage is valid and in-force and optionally to provide the insurance details of the policy.

ShortCoverageEligibilityRequest resource
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. CoverageEligibilityRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. CoverageEligibilityRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. CoverageEligibilityRequest.identifier
Definition

A unique identifier assigned to this coverage eligiblity request.

ShortBusiness Identifier for coverage eligiblity request
Comments

Every Object created by a TMS provider or TMS payer will have a unique identifier that will be generated by the source system

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Allows coverage eligibility requests to be distinguished and referenced.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. CoverageEligibilityRequest.status
Definition

The status of the resource instance.

Shortactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. CoverageEligibilityRequest.priority
Definition

When the requestor expects the processor to complete processing.

ShortDesired processing priority
Control10..1
BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority
(example to http://hl7.org/fhir/ValueSet/process-priority)

The timeliness with which processing is required: STAT, normal, Deferred.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Needed to advise the prossesor on the urgency of the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. CoverageEligibilityRequest.purpose
Definition

Code to specify whether requesting: prior authorization requirements for some service categories or billing codes; benefits for coverages specified or discovered; discovery and return of coverages for the patient; and/or validation that the specified coverage is in-force at the date/period specified or 'now' if not specified.

Shortauth-requirements | benefits | discovery | validation
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Purpose of the object wether to check policy coverage status or validating an existing coverage or validating a service is covered or not as requested by the patient

Control1..*
BindingThe codes SHALL be taken from EligibilityRequestPurposehttp://hl7.org/fhir/ValueSet/eligibilityrequest-purpose|4.0.1
(required to http://hl7.org/fhir/ValueSet/eligibilityrequest-purpose|4.0.1)

A code specifying the types of information being requested.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

To indicate the processing actions requested.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. CoverageEligibilityRequest.patient
Definition

The party who is the beneficiary of the supplied coverage and for whom eligibility is sought.

ShortIntended recipient of products and services
Comments

1..1.

Control1..1
TypeReference(Patient, Patient)
Is Modifierfalse
Summarytrue
Requirements

Required to provide context and coverage validation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. CoverageEligibilityRequest.created
Definition

The date when this resource was created.

ShortCreation date
Comments

Default date should be present day

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to record a timestamp for use by both the recipient and the issuer.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. CoverageEligibilityRequest.enterer
Definition

Person who created the request.

ShortAuthor
Control10..1
TypeReference(Practitioner, PractitionerRole, Practitioner, PractitionerRole)
Is Modifierfalse
Summaryfalse
Requirements

Some jurisdictions require the contact information for personnel completing eligibility requests.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. CoverageEligibilityRequest.provider
Definition

The provider which is responsible for the request.

ShortParty responsible for the request
Comments

Typically this field would be 1..1 where this party is responsible for the eligibility request but not necessarily professionally responsible for the provision of the individual products and services listed below.

Control10..1
TypeReference(Practitioner, PractitionerRole, Organization, Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summaryfalse
Requirements

Needed to identify the requestor.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. CoverageEligibilityRequest.insurer
Definition

The Insurer who issued the coverage in question and is the recipient of the request.

ShortCoverage issuer
Control1..1
TypeReference(Organization, Organization)
Is Modifierfalse
Summarytrue
Requirements

Need to identify the recipient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. CoverageEligibilityRequest.facility
Definition

Facility where the services are intended to be provided.

ShortServicing facility
Control10..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Requirements

Insurance adjudication can be dependant on where services were delivered.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. CoverageEligibilityRequest.supportingInfo
Definition

Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

ShortSupporting information
Comments

Often there are multiple jurisdiction specific valuesets which are required.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. CoverageEligibilityRequest.supportingInfo.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. CoverageEligibilityRequest.supportingInfo.sequence
Definition

A number to uniquely identify supporting information entries.

ShortInformation instance identifier
Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. CoverageEligibilityRequest.supportingInfo.information
Definition

Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

ShortData to be provided
Comments

Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

Control1..1
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Requirements

To convey the data content to be provided when the information is more than a simple code or period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. CoverageEligibilityRequest.insurance
Definition

Financial instruments for reimbursement for the health care products and services.

ShortPatient insurance information
Comments

All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

There must be at least one coverage for which eligibility is requested.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. CoverageEligibilityRequest.insurance.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. CoverageEligibilityRequest.insurance.coverage
Definition

Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

ShortInsurance information
Control1..1
TypeReference(Coverage, Coverage)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Required to allow the adjudicator to locate the correct policy and history within their information system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. CoverageEligibilityRequest.item
Definition

Service categories or billable services for which benefit details and/or an authorization prior to service delivery may be required by the payor.

ShortItem to be evaluated for eligibiity
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

The items to be processed for the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. CoverageEligibilityRequest.item.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. CoverageEligibilityRequest.item.category
Definition

Code to identify the general type of benefits under which products and services are provided.

ShortBenefit classification
Comments

Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

Control0..1
BindingFor example codes, see Benefit Categoryhttp://hl7.org/fhir/ValueSet/ex-benefitcategory
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-benefitcategory)
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Needed to convey the category of service or product for which eligibility is sought.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. CoverageEligibilityRequest.item.productOrService
Definition

This contains the product, service, drug or other billing code for the item.

ShortBilling, service, product, or drug code
Comments

Code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI).

Control10..1
BindingFor example codes, see ProductorServicehttp://hl7.org/fhir/ValueSet/service-uscls
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-productorservice)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Needed to convey the actual service or product for which eligibility is sought.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. CoverageEligibilityRequest.item.provider
Definition

The practitioner who is responsible for the product or service to be rendered to the patient.

ShortPerfoming practitioner
Control0..1
TypeReference(Practitioner, PractitionerRole, Practitioner, PractitionerRole)
Is Modifierfalse
Summaryfalse
Requirements

Needed to support the evaluation of the eligibility.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. CoverageEligibilityRequest.item.facility
Definition

Facility where the services will be provided.

ShortServicing facility
Control0..1
TypeReference(Location, Organization, Organization)
Is Modifierfalse
Summaryfalse
Requirements

Needed to support the evaluation of the eligibility.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. CoverageEligibilityRequest.item.diagnosis
Definition

Patient diagnosis for which care is sought.

ShortApplicable diagnosis
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Needed to support the evaluation of the eligibility.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. CoverageEligibilityRequest.item.diagnosis.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. CoverageEligibilityRequest.item.diagnosis.diagnosis[x]
Definition

The nature of illness or problem in a coded form or as a reference to an external defined Condition.

ShortNature of illness or problem
Control0..1
BindingFor example codes, see ICD10 Diagnostic codeshttp://hl7.org/fhir/ValueSet/icd-10
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-diagnostic-code)
TypeChoice of: CodeableConcept, Reference(Condition, Condition)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Provides health context for the evaluation of the products and/or services.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. CoverageEligibilityRequest.item.detail
Definition

The plan/proposal/order describing the proposed service in detail. This element should use existing ABDM FHIR profiles, if any profile not present then use FHIR base profiles.


The plan/proposal/order describing the proposed service in detail.

ShortProduct or service details
Control0..*
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Requirements

Needed to provide complex service proposal such as a Device or a plan.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. CoverageEligibilityRequest
2. CoverageEligibilityRequest.identifier
Comments

Every Object created by a TMS provider or TMS payer will have a unique identifier that will be generated by the source system

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
Must Supporttrue
4. CoverageEligibilityRequest.priority
Control1..?
6. CoverageEligibilityRequest.purpose
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Purpose of the object wether to check policy coverage status or validating an existing coverage or validating a service is covered or not as requested by the patient

Must Supporttrue
8. CoverageEligibilityRequest.patient
TypeReference(Patient)
10. CoverageEligibilityRequest.created
Comments

Default date should be present day

12. CoverageEligibilityRequest.enterer
Control1..?
TypeReference(Practitioner, PractitionerRole)
14. CoverageEligibilityRequest.provider
Control1..?
TypeReference(Practitioner, PractitionerRole, Organization)
16. CoverageEligibilityRequest.insurer
TypeReference(Organization)
18. CoverageEligibilityRequest.facility
Control1..?
20. CoverageEligibilityRequest.supportingInfo
Must Supporttrue
22. CoverageEligibilityRequest.insurance
Control1..?
Must Supporttrue
24. CoverageEligibilityRequest.insurance.coverage
TypeReference(Coverage)
Must Supporttrue
26. CoverageEligibilityRequest.item
Must Supporttrue
28. CoverageEligibilityRequest.item.category
BindingFor example codes, see Benefit Category
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-benefitcategory)
30. CoverageEligibilityRequest.item.category.coding
32. CoverageEligibilityRequest.item.category.coding.system
Control1..?
34. CoverageEligibilityRequest.item.category.coding.code
Control1..?
36. CoverageEligibilityRequest.item.category.coding.display
Control1..?
38. CoverageEligibilityRequest.item.productOrService
Control1..?
BindingFor example codes, see ProductorService
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-productorservice)
Must Supporttrue
40. CoverageEligibilityRequest.item.productOrService.coding
42. CoverageEligibilityRequest.item.productOrService.coding.system
Control1..?
44. CoverageEligibilityRequest.item.productOrService.coding.code
Control1..?
46. CoverageEligibilityRequest.item.productOrService.coding.display
Control1..?
48. CoverageEligibilityRequest.item.provider
TypeReference(Practitioner, PractitionerRole)
50. CoverageEligibilityRequest.item.facility
TypeReference(Location, Organization)
52. CoverageEligibilityRequest.item.diagnosis
Must Supporttrue
54. CoverageEligibilityRequest.item.diagnosis.diagnosis[x]
BindingFor example codes, see ICD10 Diagnostic codes
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-diagnostic-code)
TypeChoice of: CodeableConcept, Reference(Condition)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
56. CoverageEligibilityRequest.item.detail
Definition

The plan/proposal/order describing the proposed service in detail. This element should use existing ABDM FHIR profiles, if any profile not present then use FHIR base profiles.

Guidance on how to interpret the contents of this table can be found here

0. CoverageEligibilityRequest
Definition

The CoverageEligibilityRequest provides patient and insurance coverage information to an insurer for them to respond, in the form of an CoverageEligibilityResponse, with information regarding whether the stated coverage is valid and in-force and optionally to provide the insurance details of the policy.

ShortCoverageEligibilityRequest resource
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. CoverageEligibilityRequest.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. CoverageEligibilityRequest.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. CoverageEligibilityRequest.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. CoverageEligibilityRequest.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. CoverageEligibilityRequest.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. CoverageEligibilityRequest.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. CoverageEligibilityRequest.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. CoverageEligibilityRequest.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. CoverageEligibilityRequest.identifier
Definition

A unique identifier assigned to this coverage eligiblity request.

ShortBusiness Identifier for coverage eligiblity request
Comments

Every Object created by a TMS provider or TMS payer will have a unique identifier that will be generated by the source system

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Allows coverage eligibility requests to be distinguished and referenced.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. CoverageEligibilityRequest.status
Definition

The status of the resource instance.

Shortactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodes
(required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. CoverageEligibilityRequest.priority
Definition

When the requestor expects the processor to complete processing.

ShortDesired processing priority
Control1..1
BindingFor example codes, see ProcessPriorityCodes
(example to http://hl7.org/fhir/ValueSet/process-priority)

The timeliness with which processing is required: STAT, normal, Deferred.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Needed to advise the prossesor on the urgency of the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. CoverageEligibilityRequest.purpose
Definition

Code to specify whether requesting: prior authorization requirements for some service categories or billing codes; benefits for coverages specified or discovered; discovery and return of coverages for the patient; and/or validation that the specified coverage is in-force at the date/period specified or 'now' if not specified.

Shortauth-requirements | benefits | discovery | validation
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

Purpose of the object wether to check policy coverage status or validating an existing coverage or validating a service is covered or not as requested by the patient

Control1..*
BindingThe codes SHALL be taken from EligibilityRequestPurpose
(required to http://hl7.org/fhir/ValueSet/eligibilityrequest-purpose|4.0.1)

A code specifying the types of information being requested.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

To indicate the processing actions requested.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. CoverageEligibilityRequest.patient
Definition

The party who is the beneficiary of the supplied coverage and for whom eligibility is sought.

ShortIntended recipient of products and services
Comments

1..1.

Control1..1
TypeReference(Patient)
Is Modifierfalse
Summarytrue
Requirements

Required to provide context and coverage validation.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. CoverageEligibilityRequest.serviced[x]
Definition

The date or dates when the enclosed suite of services were performed or completed.

ShortEstimated date or dates of service
Control0..1
TypeChoice of: date, Period
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Required to provide time context for the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. CoverageEligibilityRequest.created
Definition

The date when this resource was created.

ShortCreation date
Comments

Default date should be present day

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to record a timestamp for use by both the recipient and the issuer.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. CoverageEligibilityRequest.enterer
Definition

Person who created the request.

ShortAuthor
Control1..1
TypeReference(Practitioner, PractitionerRole)
Is Modifierfalse
Summaryfalse
Requirements

Some jurisdictions require the contact information for personnel completing eligibility requests.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. CoverageEligibilityRequest.provider
Definition

The provider which is responsible for the request.

ShortParty responsible for the request
Comments

Typically this field would be 1..1 where this party is responsible for the eligibility request but not necessarily professionally responsible for the provision of the individual products and services listed below.

Control1..1
TypeReference(Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summaryfalse
Requirements

Needed to identify the requestor.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. CoverageEligibilityRequest.insurer
Definition

The Insurer who issued the coverage in question and is the recipient of the request.

ShortCoverage issuer
Control1..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Requirements

Need to identify the recipient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. CoverageEligibilityRequest.facility
Definition

Facility where the services are intended to be provided.

ShortServicing facility
Control1..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Requirements

Insurance adjudication can be dependant on where services were delivered.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. CoverageEligibilityRequest.supportingInfo
Definition

Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

ShortSupporting information
Comments

Often there are multiple jurisdiction specific valuesets which are required.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. CoverageEligibilityRequest.supportingInfo.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. CoverageEligibilityRequest.supportingInfo.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. CoverageEligibilityRequest.supportingInfo.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. CoverageEligibilityRequest.supportingInfo.sequence
Definition

A number to uniquely identify supporting information entries.

ShortInformation instance identifier
Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. CoverageEligibilityRequest.supportingInfo.information
Definition

Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

ShortData to be provided
Comments

Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

Control1..1
TypeReference(Resource)
Is Modifierfalse
Summaryfalse
Requirements

To convey the data content to be provided when the information is more than a simple code or period.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. CoverageEligibilityRequest.supportingInfo.appliesToAll
Definition

The supporting materials are applicable for all detail items, product/servce categories and specific billing codes.

ShortApplies to all items
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Needed to convey that the information is universal to the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. CoverageEligibilityRequest.insurance
Definition

Financial instruments for reimbursement for the health care products and services.

ShortPatient insurance information
Comments

All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

Control1..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

There must be at least one coverage for which eligibility is requested.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. CoverageEligibilityRequest.insurance.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
58. CoverageEligibilityRequest.insurance.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. CoverageEligibilityRequest.insurance.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. CoverageEligibilityRequest.insurance.focal
Definition

A flag to indicate that this Coverage is to be used for evaluation of this request when set to true.

ShortApplicable coverage
Comments

A patient may (will) have multiple insurance policies which provide reimburement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for evaluating this request. Other requests would be created to request evaluation against the other listed policies.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

To identify which coverage in the list is being used to evaluate this request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. CoverageEligibilityRequest.insurance.coverage
Definition

Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

ShortInsurance information
Control1..1
TypeReference(Coverage)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Required to allow the adjudicator to locate the correct policy and history within their information system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. CoverageEligibilityRequest.insurance.businessArrangement
Definition

A business agreement number established between the provider and the insurer for special business processing purposes.

ShortAdditional provider contract number
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. CoverageEligibilityRequest.item
Definition

Service categories or billable services for which benefit details and/or an authorization prior to service delivery may be required by the payor.

ShortItem to be evaluated for eligibiity
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

The items to be processed for the request.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. CoverageEligibilityRequest.item.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
72. CoverageEligibilityRequest.item.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
74. CoverageEligibilityRequest.item.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. CoverageEligibilityRequest.item.supportingInfoSequence
Definition

Exceptions, special conditions and supporting information applicable for this service or product line.

ShortApplicable exception or supporting information
Control0..*
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Needed to support or inform the consideration for eligibility.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. CoverageEligibilityRequest.item.category
Definition

Code to identify the general type of benefits under which products and services are provided.

ShortBenefit classification
Comments

Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

Control0..1
BindingFor example codes, see Benefit Category
(example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-benefitcategory)
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Needed to convey the category of service or product for which eligibility is sought.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. CoverageEligibilityRequest.item.category.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
82. CoverageEligibilityRequest.item.category.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on CoverageEligibilityRequest.item.category.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 84. CoverageEligibilityRequest.item.category.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    86. CoverageEligibilityRequest.item.category.coding.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    88. CoverageEligibilityRequest.item.category.coding.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on CoverageEligibilityRequest.item.category.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 90. CoverageEligibilityRequest.item.category.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control1..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. CoverageEligibilityRequest.item.category.coding.version
      Definition

      The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

      ShortVersion of the system - if relevant
      Comments

      Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

      NoteThis is a business version Id, not a resource version Id (see discussion)
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      94. CoverageEligibilityRequest.item.category.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control1..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. CoverageEligibilityRequest.item.category.coding.display
      Definition

      A representation of the meaning of the code in the system, following the rules of the system.

      ShortRepresentation defined by the system
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. CoverageEligibilityRequest.item.category.coding.userSelected
      Definition

      Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

      ShortIf this coding was chosen directly by the user
      Comments

      Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. CoverageEligibilityRequest.item.category.text
      Definition

      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

      ShortPlain text representation of the concept
      Comments

      Very often the text is the same as a displayName of one of the codings.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      102. CoverageEligibilityRequest.item.productOrService
      Definition

      This contains the product, service, drug or other billing code for the item.

      ShortBilling, service, product, or drug code
      Comments

      Code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI).

      Control1..1
      BindingFor example codes, see ProductorService
      (example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-productorservice)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Needed to convey the actual service or product for which eligibility is sought.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      104. CoverageEligibilityRequest.item.productOrService.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      106. CoverageEligibilityRequest.item.productOrService.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on CoverageEligibilityRequest.item.productOrService.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 108. CoverageEligibilityRequest.item.productOrService.coding
        Definition

        A reference to a code defined by a terminology system.

        ShortCode defined by a terminology system
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..*
        TypeCoding
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        110. CoverageEligibilityRequest.item.productOrService.coding.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        112. CoverageEligibilityRequest.item.productOrService.coding.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on CoverageEligibilityRequest.item.productOrService.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 114. CoverageEligibilityRequest.item.productOrService.coding.system
          Definition

          The identification of the code system that defines the meaning of the symbol in the code.

          ShortIdentity of the terminology system
          Comments

          The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to be unambiguous about the source of the definition of the symbol.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          116. CoverageEligibilityRequest.item.productOrService.coding.version
          Definition

          The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

          ShortVersion of the system - if relevant
          Comments

          Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

          NoteThis is a business version Id, not a resource version Id (see discussion)
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          118. CoverageEligibilityRequest.item.productOrService.coding.code
          Definition

          A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

          ShortSymbol in syntax defined by the system
          Control1..1
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to refer to a particular code in the system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. CoverageEligibilityRequest.item.productOrService.coding.display
          Definition

          A representation of the meaning of the code in the system, following the rules of the system.

          ShortRepresentation defined by the system
          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. CoverageEligibilityRequest.item.productOrService.coding.userSelected
          Definition

          Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

          ShortIf this coding was chosen directly by the user
          Comments

          Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

          Control0..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          124. CoverageEligibilityRequest.item.productOrService.text
          Definition

          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

          ShortPlain text representation of the concept
          Comments

          Very often the text is the same as a displayName of one of the codings.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          126. CoverageEligibilityRequest.item.modifier
          Definition

          Item typification or modifiers codes to convey additional context for the product or service.

          ShortProduct or service billing modifiers
          Comments

          For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

          Control0..*
          BindingFor example codes, see ModifierTypeCodes
          (example to http://hl7.org/fhir/ValueSet/claim-modifiers)

          Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          To support provision of the item or to charge an elevated fee.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          128. CoverageEligibilityRequest.item.provider
          Definition

          The practitioner who is responsible for the product or service to be rendered to the patient.

          ShortPerfoming practitioner
          Control0..1
          TypeReference(Practitioner, PractitionerRole)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Needed to support the evaluation of the eligibility.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          130. CoverageEligibilityRequest.item.quantity
          Definition

          The number of repetitions of a service or product.

          ShortCount of products or services
          Control0..1
          TypeQuantity(SimpleQuantity)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Required when the product or service code does not convey the quantity provided.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          132. CoverageEligibilityRequest.item.unitPrice
          Definition

          The amount charged to the patient by the provider for a single unit.

          ShortFee, charge or cost per item
          Control0..1
          TypeMoney
          Is Modifierfalse
          Summaryfalse
          Requirements

          Needed to support the evaluation of the eligibility.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          134. CoverageEligibilityRequest.item.facility
          Definition

          Facility where the services will be provided.

          ShortServicing facility
          Control0..1
          TypeReference(Location, Organization)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Needed to support the evaluation of the eligibility.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          136. CoverageEligibilityRequest.item.diagnosis
          Definition

          Patient diagnosis for which care is sought.

          ShortApplicable diagnosis
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Needed to support the evaluation of the eligibility.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          138. CoverageEligibilityRequest.item.diagnosis.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          140. CoverageEligibilityRequest.item.diagnosis.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          142. CoverageEligibilityRequest.item.diagnosis.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          144. CoverageEligibilityRequest.item.diagnosis.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control0..1
          BindingFor example codes, see ICD10 Diagnostic codes
          (example to https://nrces.in/ndhm/fhir/r4/ValueSet/ndhm-diagnostic-code)
          TypeChoice of: CodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          146. CoverageEligibilityRequest.item.detail
          Definition

          The plan/proposal/order describing the proposed service in detail. This element should use existing ABDM FHIR profiles, if any profile not present then use FHIR base profiles.

          ShortProduct or service details
          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Needed to provide complex service proposal such as a Device or a plan.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))